X50

Done 50 Xs

After TED

Well it was tiring but good everyone was really interested and love the printer and the prints there less and less of the little robots I think there's only 5 now poor dudes.

At the TREx Dublin

So ready to go printing little x's

TEDx Dublin

Off to demo the printer here at the Bord Gais Energy Theater tomorrow Saturday 7th sept. I wont be talking but in between talks I will be showing off the printer if you about say hi there will be a X print for you in it.

Doors open at 12... I think

http://www.tedxdublin.com/

PUP- Pimped Up Printer

So this is the tour of the printer well what i have printed and stuck on it

so on the right side

1:Quick connect shim

http://www.thingiverse.com/thing:22851

2: Tool Thing

http://www.thingiverse.com/thing:18098

3:SD Holder

http://www.thingiverse.com/thing:27939

4: UltiController Replacment knob

http://www.thingiverse.com/thing:22965

 on the left side

1:Filament spool

http://www.thingiverse.com/thing:10219

2: Z-axis end switch

http://www.thingiverse.com/thing:11033

hope thats useful to someone

Time Lapse

 

Here is my set up for doing time lapses, nothing special using a canon 400D with a Giga T pro remote that has a time lapse setting.

Its normally set to 10-15 seconds depending on the shape of the print 15 seconds is nice fore tall prints where 5-10 is better for smaller flatter prints.

one other bit of equipment is power i have a old power supply for the 400D which really helps on 7 hours and more prints

 

well hope this helps out 

Black and White

A couple of Yokes

what are they??... nobody knows... could be anything... even tho they say bottles there not.

Black bottle from Dave Head on Vimeo.

White bottle from Dave Head on Vimeo.

Octo TimeLapse

A low res Octopus
http://www.thingiverse.com/thing:8896

octo from Dave Head on Vimeo.

TREx 3d print

Just finished off a little print, there will be a small timelapse at some stage

The Beast!!! well the printer anyway

There will a small tour of the printer coming along in the next couple of days showing the printed parts I use to keep the Ultimaker looking cool tho it dosnt really need any help.